Several forms of water jet cutting machine

  In the abrasive situation to points: water cutting with abrasive and without abrasive cutting.
       With equipment to points: divided into large and small water jet cutting water cutting.
       Pressure to points: divided into high-and low-pressure type, generally 100Mp as boundaries. 100Mp more high-pressure type, 100Mp following is a low pressure type. The 200MP above is UHP type.
       Technical principles to points: divided into pre-and post-Mix-Mix.
       Safety cut to points: cutting into the safety and non-safety cut class, the main difference in pressure above, 100Mp the following low pressure type water jet cutter can be applied.
       Special industries such as: hazardous, areas of oil, coal, hazardous materials handling. After a lot of experiments it was found that when the pressure exceeds a certain threshold, even if the water will put some sensitivity to chemicals detonated, and sediment containing abrasive waterjet cutting due to the sand, the sand and the potential impact and objects collide, producing the energy can also cause instability specialty chemicals, after a lot of experimentation and demonstration, and finally come to its threshold at around 237.6MP. Therefore, in the water cutting industry, people on the 200MP above waterjet cnc cutting is mainly used in the machining industry.
Shandong EAAK Machinery Co., Ltd